Loading ...
Loading ...
Loading ...
118
Using the flash (sold separately)
Notes
• When the exposure mode is set to S or M, slow sync shooting is not available using
the SLOW SYNC button.
• When a function other than the AEL function is selected in [Func. of AEL button],
slow sync shooting is not available using the SLOW SYNC button. When the AEL
function is selected in [ISO Button], [AF/MF button], [Custom button], or [Preview
Button], slow sync shooting is available using these buttons.
• You can use a flash equipped with a flash sync terminal of the opposite
polarity.
Notes
• Select the manual exposure mode (settings other than ISO AUTO are recommended)
and set the shutter speed to 1/250 second. If the shutter speed recommended on the
flash is slower than that, use the recommended speed or an even slower speed.
• If you cannot confirm your composition in dark situations, change the [Live View
Display] setting so that the image is always displayed with the appropriate
brightness (page 89).
• Use a flash with a flash sync voltage of 400 V or less.
• Before you connect the flash sync cord to the (flash sync) terminal, turn off the
power of the connected flash. If the power is on, it may flash when you connect the
cord.
• The flash will always be full emission. Flash compensation (page 120) cannot be
used.
• Using auto white balance is not recommended. Use custom white balance to gain
more precise white balance.
• The flash indicator is not displayed when the (flash sync) terminal is plugged in.
Using a flash equipped with a flash sync terminal cord
Open the cover of the (flash sync)
terminal and plug the cord in.
(flash sync) terminal
Loading ...
Loading ...
Loading ...