Loading ...
Loading ...
Loading ...
13
ENGLISH
SPECIFICATION AND DIMENSION OF EACH
PART
The product specifications are subject to change without prior notice for product improvements.
~ refers to alternating current (AC), refers to direct current (DC).
Specifications
Detector
Category Specifications
Model 17HK701G
Sensor Type Amorphous Silicon TFT
Scintillator Type CsI:TI
Total Pixel Matrix 3072 x 3072 pixels
Total Pixel Area 430.08 mm x 430.08 mm
Pixel Pitch 140 um
Effective Pixel Matrix 3060 x 3060 pixels
A/D Conversion 16 bit
Data transmission 802.11 a/b/g/n/ac Wireless LAN Standard, 150 Mbps
Wired Gigabit Ethernet Standard, 500 Mbps
Cycle time Typ. 8 Sec (Wired)
Typ. 11 Sec (Wireless)
Image Transmission Typ. 2 Sec (Wired)
Typ. 2.5 Sec (Wireless)
Image Storage Stores up to 200 images
Energy Range 40 kVP ~ 150 kVp
MTF Typ. 89 % at 0.5 lp/mm
Category Specifications
DQE Typ. 72 % at 0.1 lp/mm
Size (Width x Height x Depth) 460.0 x 460.0 x 15.6 mm
(18.1 x 18.1 x 0.6 inch)
Weight Typ. 3.6 kg (7.9 lbs)
Window Materials Carbon Fiber
Trigger Mode Manual Mode
Auto Mode (Auto Exposure Detection)
Power Consumption Typ. 30.5 W (For shooting)
Wireless Standard:
802.11 a/b/g/n/ac compliance
Peak mode: 867 Mbps
Frequency: 2.4 GHz / 5 GHz
Bandwidth: 20 MHz / 40 MHz / 80 MHz
MIMO: 2X2
Rating 24 V 2.1 A
Applied part Type: BF
Location: The front side of the detector (Effective area only)
NOTE
• Maximum wireless signal rate derived from IEEE standard specifications. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
• Recommended Maximum operable distance: 2 m (6.5 ft) (From the Access Point)
• Wireless antennas: The module adopts the latest 802.11ac technology. The transmitter of the module is
powered by host equipment (Detector). The antennas are 2 printed-dipole antennas.
• Wireless module: 802.11 a/b/g/n/ac USB2.0 module is implemented. It supports 2T2R (2 transmit 2 receive)
MIMO technology, which delivers throughput up to 300 Mbps.
• Images can be saved by the X-ray generator while the power of the detector is turned on without connecting
to a PC. To produce images, X-ray is irradiated at intervals of more than 10 seconds. Check and load the saved
images from LG Acquisition Workstation Software.
Loading ...
Loading ...
Loading ...