Loading ...
Loading ...
Loading ...
nuwavenow.com
33
ENGLISH
nuwavenow.com
33
Lid Holder
Use the Lid Holder for both the
PRESSURE Lid and Air Fryer
Lid to keep from touching hot
surfaces and to allow the lids to
cool down.
1. After using the PRESSURE
function, ensure that all
steam/pressure has been
released prior to removing
the lid.
See section Releasing
Pressure on page 15.
2. Remove the PRESSURE Lid
from the Duet and place the
bottom of the Lid on the two
lower horizontal bars with the
rim resting in between each.
The underside of the Lid will face out.
Back of Lid
Inside
of Lid
Lid Holder
Cleaning Pressure Indicator Valve
Remove the Silicone Valve Gasket underneath
the Lid covering the bottom of the Pressure
Indicator Valve. When removed, the Pressure
Indicator will be released. Both parts can be
rinsed under running water, and can be cleaned
with soap, if needed. Then, dry it.
When clean and dry, place
Pressure Indicator Valve back
through its hole. Replace the
Silicone Valve Gasket over the bottom of the
Pressure Indicator Valve. Ensure that the t is
snug and that the Pressure Indicator is moving up and down freely.
Pressure
Indicator Valve
Loading ...
Loading ...
Loading ...