Loading ...
Loading ...
Loading ...
32 PB
OPERATION
Remote Control Description
Operation guide
Replacement of batteries in remote controller
● During operation, point the remote control signal sender at the receiving window on indoor unit.
1. After putting through the power, press "ON/OFF" button on remote controller to turn on the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT.
3. Press "▲" or "
▲
" button to set your required temperature. (Temperature can't be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed.
5. Press "SWING" button to select fan blowing angle.
1. Press the back side of remote controller marked with "
● The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them.
indoor unit during operation.
● Replace new batteries of the same model when replacement is required.
● If you won't use remote controller for a long time, please take out the batteries.
● If the display on remote controller is fuzzy or there's no display, please replace batteries.
out
the cover of battery box along the arrow direction.
signal sender battery
2. Replace two AAA 1.5V dry batteries, and make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
Note:
Cover of battery box
remove
reinstall
Loading ...
Loading ...
Loading ...