Loading ...
Loading ...
Loading ...
N3
User Manual
32
©
2016 DJI All Rights Reserved.
Used with the A3 Upgrade Kit
With the A3 upgrade kit (IMU Pro and GPS-Compass Pro modules), the N3 provides triple
modular redundancy, improving the system’s anti-risk performance. System status is indicated by
LEDs on the GPS-Compass Pro, IMU Pro and Flight Controller modules.
If the detected voltage is too low, the aircraft will not enter the Waypoints ight mode.
IOSD
DJI Lightbridge 2 MUST be connected to for the built-in iOSD to work. Most ight information is
displayed on-screen in the DJI GO app.
Information displayed includes voltage, flight velocity, height, distance from the home point,
horizontal attitude, GPS satellite number, etc. iOSD and video information are superposed on the
receiver, making iOSD data clearly visible and bringing you a more involved ight experience.
N3 supports DJI iOSD Mark II and iOSD mini.
LED Indicator Status
Green
The module is functioning normally and working as a part of the system
When the LED is blinking green.
Red The module is functioning abnormally When the LED is blinking red.
Blue
The module is functioning normally but not working as a part of the
system When the LED is blinking blue.
LED
Loading ...
Loading ...
Loading ...