Dji N3 User Manual - Page 30/40

Loading ...

User Manual

Return to Home

Smart RTH, Low Voltage RTH and Failsafe RTH are also available in the DJI GO app.

Smart RTH

Press the Return-To-Home button to bring the aircraft back to the Home Point. Tap again to stop

the procedure.

Low Voltage RTH

The low voltage failsafe is triggered when the LiPo Battery is depleted to a point that may aect

the safe return of the aircraft. Users are advised to return home or land the aircraft immediately

when these warnings are shown. DJI GO will advise users to return the aircraft to the Home Point

when the low voltage warning is triggered. Aircraft will automatically return to the Home Point if

no action is taken after a 10-second countdown. Cancel the RTH by pressing once on the RTH

button. The thresholds for these warnings are automatically determined based on the current

aircraft altitude and its distance from the Home Point.

Aircraft will land automatically if the current voltage can only support the aircraft to land to the

ground from the current altitude. Use the remote controller to control the aircraft’s orientation

during the landing process.

When the critical low voltage warning activates and the aircraft is descending to land

automatically, you may push the throttle upward to hover the aircraft and navigate it to a

more appropriate location for landing.

Failsafe RTH

The aircraft will not avoid obstacles while it is returning to the Home Point, and an appropriate

RTH altitude MUST be set before flight. Launch the DJI GO app and enter Camera view and

select “MODE” to set the Failsafe altitude. You should also use the control sticks to guide the

aircraft. Refer to the Safety Guidelines and Disclaimer for more details.

Intelligent Flight Modes (in DJI GO app)

Course Lock

Lock the current nose direction as the aircraft’s forward direction. The aircraft will move in the

locked directions regardless of its orientation (yaw angle).

Conditions of Use: Compass is working normally.

How to operate: Control the aircraft nose orientation-> Tap the Course Lock icon to start the

Course Lock ight.

How to reset the parameter: Aircraft nose orientation cannot be reset during ight.

How to stop or exit the ight mode: Click the “Exit” button during ight.

Loading ...

Dji N3 Flight Controller