Loading ...
Loading ...
Loading ...
N3
User Manual
24
©
2016 DJI All Rights Reserved.
Smart RTH
Use the RTH button on the remote controller when GNSS is available to enable Smart RTH.
During the Smart RTH procedure, the aircraft returns to the last recorded Home Point but you
may control the aircraft's orientation to avoid collisions. Press the Smart RTH button once to start
the process. Press the Smart RTH button again to exit Smart RTH and regain the control.
If using the DJI Lightbridge 2, no additional settings are required for the RTH button.
If using another type of remote controller, you must configure the RTH button in DJI
Assistant 2.
Low Battery RTH with LiPo battery
The low voltage failsafe is triggered when the LiPo Battery is depleted to a point that may aect
the safe return of the aircraft. Users are advised to return home or land the aircraft immediately
when these warnings are shown. Aircraft will automatically return to the Home Point if no action
is taken after 10 seconds countdown. Cancel the RTH procedure by pressing once on the RTH
button. The thresholds for these warnings are automatically determined based on the current
aircraft altitude and its distance from the Home Point.
Aircraft will land automatically only if the current voltage can support the aircraft in landing on
the ground from the current altitude. Use the remote controller to control the aircraft’s orientation
during the landing process.
Attitude Control When One Motor Output Fails
For hexa-rotor and quad-rotor, the N3 ight control system can control the aircraft’s attitude when
one motor fails:
1. During ight, the aircraft with N3 ight control system is attitude controllable when one motor
output fails
2. The motor will not start before take-o. (DJI Intelligent ESCs are required for communication.)
Select Course Lock or Home Lock mode to y the aircraft to a safe area to land when the aircraft
is far away, or the attitude can’t be recognized.
Propulsion System Protection
Low voltage and overweight aircraft warnings are provided in the DJI GO app.
When the critical battery level warning activates and the aircraft is descending to land
automatically, you may push the throttle upward to hover the aircraft and navigate it to a
more appropriate location for landing.
Loading ...
Loading ...
Loading ...