Dji N3 User Manual - Page 21/40

Loading ...

User Manual

P-OPTI mode is only available when a DJI Vision Positioning System is used.

Once the GNSS signal is recovered, or the Vision Positioning System available, the

Flight Control System can re-enter P-GPS mode or P-OPTI mode.

M mode (Manual) should be enabled and set in DJI Assistant.

Aircraft Status Indicator Description

Normal

Green Flashes Slowly Safe to Fly (P-mode with GNSS and Vision Positioning)

×2 Green Flashes Twice Safe to Fly (P-mode with Vision Positioning but without GNSS)

Yellow Flashes Slowly Safe to Fly (A mode but No GNSS and Vision Positioning)

Flight Control

Manual Take-off

Startthemotorsbypullingbothcontrolstickstothebottominside(oroutside)corners.

Releasethesticksoncethemotorsstart.Slowlypushtheleftstick(throttlestick)uptotakeoff.

Remote Controller Operation

Here are the default ight controls (Mode 2). The left stick controls altitude and rotation, while the

right stick controls the forward, backward, left or right movements. The gimbal dial controls the

camera’s tilt.

You can customize or change these controls through the DJI GO app.

Left Stick Right Stick

Loading ...

Dji N3 Flight Controller