ARCHER A5 User Guide

Loading ...

Chapter 5 Congure the Router in Access Point Mode

Done!

Now only client A and client B can access your network.

5. 6. 6. Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.

2. Go to Wireless > Wireless Advanced.

3. Configure the advanced settings of your wireless network and click Save.

Note:

If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;

otherwise it may result in lower wireless network performance.

• Transmit Power - Select High, Middle or Low which you would like to specify for the

router. High is the default setting and recommended.

• Beacon Interval - Enter a value between 40-1000 milliseconds for Beacon Interval

here. Beacon Interval value determines the time interval of the beacons. The beacons

are the packets sent by the router to synchronize a wireless network. The default

value is 100.

• RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the

packet is larger than the specified RTS Threshold size, the router will send RTS frames

to a particular receiving station and negotiate the sending of a data frame. The default

value is 2346.

• Fragmentation Threshold - This value is the maximum size determining whether

packets will be fragmented. Setting a low value for the Fragmentation Threshold may

result in poor network performance because of excessive packets. 2346 is the default

setting and is recommended.

• DTIM Interval - This value determines the interval of the Delivery Traffic Indication

Message (DTIM). A DTIM field is a countdown field informing clients of the next window

Loading ...

User Guide - Page 85