Loading ...
Loading ...
Loading ...
(Continued)
• Do not remove the sensor cover
located
on the upper end of the
passenger side windshield glass.
Damage to system parts could oc‐
cur and may not be covered by
your vehicle warranty.
• When starting the vehicle in win‐
ter
, set the wiper switch in the
OFF (O) position. Otherwise, wipers
may operate and ice may damage
the windshield wiper blades. Al‐
ways remove all snow and ice and
defrost the windshield properly
prior to operating the windshield
wipers.
• When tinting the windshield, be
careful of any fluid getting into
the sensor located in the top cen‐
ter of the front windshield. It may
damage the related parts.
Windshield washers
In the OFF (O) position, pull the lever
þently toward you to spray washer ýlu‐
id on the windshield and to run the wip‐
ers 1-3 cycles.
Use this ýunction when the windshield
is dirty.
The spray and wiper operation will con‐
tinue until you release the lever.
Iý the washer does not work, check the
washer ýluid level. Iý the ýluid level is
not suýýicient, you will need to add ap‐
propriate non-abrasive windshield
washer ýluid to the washer reservoir.
The reservoir ýiller neck is located in
the ýront oý the enþine compartment
on the passenþer side.
CAUTION
To prevent possible damage to the
washer pump, do not operate the
washer when the fluid reservoir is
empty.
WARNING
Do not use the washer in freezing
temperatur
es without first warming
the windshield with the defrosters;
(Continued)
Features oý your vehicle
5-116
Loading ...
Loading ...
Loading ...