Loading ...
Loading ...
Loading ...
English 61
4. Open the door fully. If it does not lie
perpendicular to the oven, remove the
door, and repeat Steps 1 – 3.
5. Flip the hinge locks up into the locked
position.(See Removing the oven
doors, Step 3, graphic A, pg. 75.)
6. Close the oven door, and check the gap
between the door and control panel. If
one side has a wider gap, the hinge on
that side is improperly installed.
7. Reconnect the LED wire harness.
CAUTION
To avoid damaging the wire, reinsert it as it was before you removed the door.
Changing the oven light
The oven light is a standard, 40-watt appliance halogen bulb. It comes on automatically
when the oven door is opened. If the door is closed, touch LIGHT on the control screen
to turn the light on/off. You cannot turn the light on during a self-cleaning cycle.
1. Remove power to the oven at the main
fuse or circuit breaker, and ensure the
oven and bulb are cool.
2. (Support th
e element) Turn the circular
nut on the rear wall counter-clockwise.
The element loosens and tilts down.
Important: The broil element is not
removable. Do not force the element
down or let it drop.
3. Remove the glass cover and bulb cover.
4. Replace the bulb.
5. Re-install the covers, then hold the
broil element in its operating position,
and turn the nut clockwise to tighten.
Loading ...
Loading ...
Loading ...