Loading ...
Loading ...
Loading ...
17
.
Bluetooth
®
audio system
Radio
QUESTION RESPONSE SOLUTION
There is a difference in sound quality
between the different audio sources
(radio, CD, etc.).
To allow for optimal listening quality, the audio
settings (Volume, Bass, treble, Ambience,
Loudness) can be tailored to different sound
sources, which can generate audible differences
when changing source (radio, CD, etc.).
Check that the audio settings (Volume, Bass,
Treble, Ambience and Loudness) are adapted to
the sources listened to. It is advisable to set the
audio functions (Bass, Treble, Front-Rear Balance
and Left-Right Balance) to the middle position,
select the musical ambience "None" and set the
loudness correction to the "Active" position in CD
mode or to the "Inactive" position in radio mode.
The preset stations do not function (no
sound, 87.5 MHz is displayed, etc.).
An incorrect waveband is selected. Press the BAND button to return to the waveband
(FM, FM2, DAB, AM) on which the stations are
preset.
The traffic announcement (TA) is displayed.
I do not receive any traffic information.
The radio station is not part of the regional traffic
information network.
Tune to a radio station which broadcasts traffic
information.
The reception quality of the tuned radio
station gradually deteriorates or the
stored stations are not working (no sound,
87.5 MHz is displayed , etc.).
The vehicle is too far from the transmitter of
the station or no transmitter is present in the
geographical area.
Activate the RDS function to allow the system to
see if a more powerful transmitter is within the
geographic area.
The environment (hills, buildings, tunnels,
basement car parks, etc.) block reception, including
in RDS mode.
This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been damaged (for
example when going through an automatic car
wash or in an underground car park).
Have the aerial checked by a franchised dealer.
Sound cut-outs of 1 to 2 seconds in radio
mode.
During this brief sound cut-out, the RDS searches
for another frequency giving better reception of the
station.
Switch off the RDS function if the phenomenon is
too frequent and always on the same route.
Loading ...
Loading ...
Loading ...