Loading ...
Loading ...
Loading ...
180
Driving
If the vehicle is not immobilised, the
engine will not stop.
Never leave your vehicle with the
electronic key still inside.
Switching off the engine leads to a loss of
braking assistance.
Switching the ignition on
(without starting)
F Press the "START/STOP"
button, the instrument panel
comes on but the engine does
not start.
F Press this button again to switch off the
ignition and allow the vehicle to be locked.
With the ignition on, the system
automatically goes into energy economy
mode to maintain an adequate state of
charge in the battery.
Key not detected
Back-up starting
A back-up reader is fitted to the steering
column to allow the engine to be started if
the system does not detect the key in the
recognition zone, or when the battery in the
electronic key is discharged.
F With a manual gearbox, place the gear
lever in neutral, then fully depress the clutch
pedal.
F With an automatic gearbox, select
position P, then firmly press the brake
pedal.
F Press the "START/STOP" button.
The engine starts.
Back-up switch-off
With the Keyless Entry and Starting remote
control inside the vehicle, pressing the "START/
STOP" button, with no action on the pedals,
allows the ignition to be switched on.
This also allows some equipment to be
activated (examples: audio system, lighting,
etc.).
F Place and hold the remote control against
the reader.
When the electronic key is not detected or is
no longer in the recognition zone, a message
appears in the instrument panel when closing a
door or trying to switch off the engine.
Loading ...
Loading ...
Loading ...