Loading ...
Loading ...
Loading ...
3
109
Ease of use and comfort
F To deactivate the programming, press
on button 4 until the message "OK" is
displayed.
During these operations, if the message
"FAIL" is displayed, it means that the
signal has not been received. Follow the
procedure again after having changed
position.
Stopping the heating
F Press button 5.
Changing the heating level
The system has 5 heating levels: C1 (lowest
level) to C5 (highest level).
F After having displayed the heating level
using buttons 1, press simultaneously on
buttons 4 and 5.
The letter "C" will flash.
This symbol will disappear.
This symbol will remain lit.
This indicator lamp turns off.
F Adjust the heating level by pressing
buttons 1.
F Simultaneously press buttons 4 and 5 to
save the selected level.
The letter "C" will be displayed.
The presets are replaced by the new
entries. The programmed times are
memorised until the next change.
When the start time is activated, it is not
possible to change the heating level. You
must first deactivate the start time.
Operating fault
In the event of a fault with the programmable
heating, contact a PEUGEOT dealer or a
qualified workshop.
Changing the battery
The remote control is powered by a 6V-28L
battery, which is provided.
Information on the screen indicates when this
battery needs to be changed.
F Unclip the case.
F Replace the battery observing the
polarities.
F Reset the remote control.
Reinitialising the remote control
If the battery is disconnected or when changing
the battery, the remote control must be
reinitialised.
F After turning on the power, within the next
5 seconds, press button 4 for 1 second.
If the operation is successful, the message
"OK" will be displayed on the remote
control's screen.
If there is a fault, the message "FAIL" will
appear.
F Start the operation again.
Do not throw away used batteries, take
them to an approved collection point.
Loading ...
Loading ...
Loading ...