Loading ...
Loading ...
Loading ...
210
Driving
When the cruise control is paused, it
can only be reactivated when all of the
safety conditions are met. The message
"Activation not possible, conditions
unsuitable" is displayed while reactivation
is not possible.
As a safety measure, wait until the current
speed reaches the speed set to reactivate
the function by pressing button 4.
Modification of the speed
setting
Modication from the current
speed
F By successive short presses on button 2 or 3,
to raise or lower the setting in steps of + or –
1 mph (km/h).
F By a maintained press on button 2 or 3, to
raise or lower the setting in steps of + or –
5 mph (5 km/h).
Take care: a prolonged press on
button 2 or 3 will cause a very quick
change in the speed of your vehicle.
Modication from the speed limit
sign recognition system
F The suggested speed is displayed in the
instrument panel.
F Make an initial press on button 5; a
message is displayed to confirm the
memorisation request.
F Press button 5 again to save the suggested
speed.
The speed displays immediately in the
instrument panel as the new speed setting.
For more information on Recognition of
speed limit signs and recommendation,
refer to the corresponding section.
As a precaution, it is recommended
that you select a cruise speed close to
the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration of the vehicle.
Modification of the
programmed inter-vehicle
distance
Three threshold settings are suggested for the
inter-vehicle distance:
- "Distant" (3 dashes),
- "Normal" (2 dashes),
- "Close" (1 dash).
Engine running and cruise control on (green),
you can modify the speed setting.
Loading ...
Loading ...
Loading ...