User Manual - Page 198

For 2017 PEUGEOT 5008.

Loading ...
Loading ...
Loading ...
196
Driving
Under-inflation alert
This warning is indicated by
continuous illumination of the lamp,
an audible signal and, depending on
the equipment installed, a message
displayed on the screen.
F Reduce speed immediately, avoid excessive
steering movements and sudden braking.
F Stop the vehicle as soon as it is safe to do
so.
The loss of pressure detected does not
always cause visible bulging of the tyre.
Do not satisfy yourself with just a visual
check.
F If you have a compressor, such as the one
in the temporary puncture repair kit, check
the pressures of the four tyres when cold.
F If it is not possible to make this check
immediately, drive carefully at reduced
speed.
or
F In case of a puncture, use the temporary
tyre repair kit or the spare wheel (if
equipped).
The alert is kept active until the system is
reinitialised.
Reinitialisation
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.
Before reinitialising the system, ensure
that the pressures of the four tyres
are correct for the conditions of use
of the vehicle and conform to the
recommendations on the tyre pressure
label.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
F Select the "Define the vehicle
parameters" menu.
F Select the "Driving assistance" menu.
F Select the "Tyre inflation" menu.
F Select the "Reinitialisation" function.
F Select "Yes" to confirm.
Reinitialisation is confirmed by an audible
signal.
Touch screen
F In this menu, select the "Vehicle settings"
tab.
F In the page, select the " Under-inflation
initialisation" function.
F Select "Yes" to confirm.
The reinitialisation is confirmed by the display
of a message and an audible signal.
Monochrome screen C
Reinitialisation of the function is
done in the "Personalisation-
configuration" menu of the screen.
Reinitialisation of the function is
done in the Vehicle / Driving menu
of the touch screen.
Loading ...
Loading ...
Loading ...