User Manual - Page 181

For 2017 PEUGEOT 5008.

Loading ...
Loading ...
Loading ...
179
6
Driving
Starting / Switching off
the engine with Keyless
Entry and Starting
Starting the engine
The presence of the " Keyless Entry and
Starting" electronic key in the recognition
zone is essential.
If the electronic key is not detected in this
zone, a message is displayed.
Move the electronic key into this zone so
that the engine can be started.
If there is still a problem, refer to the "Key
not detected – Back-up starting" section.
F Briefly press the "START/
STOP" button while maintaining
pressure on the pedal until the
engine starts.
The steering column unlocks and the engine
starts.
For Diesel engines, when the temperature is
negative and/or the engine is cold, the start
will only take place once the preheater warning
lamp is off.
F With an automatic gearbox, you should
keep the brake pedal fully depressed until
the warning lamp goes off and not press
the "START/STOP" button again until the
engine is running.
If one of the starting conditions is not met,
a reminder message is displayed in the
instrument panel.
In some circumstances, it is necessary to turn
the steering wheel slightly while pressing the
"START/STOP" button to assist unlocking of
the steering column; a message warns you
when this is needed.
As a safety measure, never leave the
vehicle while the engine is running.
F With a manual gearbox, put the gear lever
into neutral.
F With the electronic key inside the vehicle,
fully depress the clutch pedal.
F With an automatic gearbox, place the gear
selector in P or N mode.
F With the electronic key inside the vehicle,
fully depress the brake pedal.
If this warning lamp comes on after
pressing the "START/STOP" button:
F With a manual gearbox, you should keep
the clutch pedal fully depressed until the
warning lamp goes off and not press the
"START/STOP" button again until the
engine is running.
Switching off the engine
F Immobilise the vehicle, engine at idle.
F With a manual gearbox, put the gear lever
into neutral.
F With an automatic gearbox, place the gear
selector in P or N mode.
F With the electronic key inside
the vehicle, press the "START/
STOP" button.
The engine stops and the steering column
locks.
Loading ...
Loading ...
Loading ...