Owner’s Manual - Page 33

For MII 2012.

Loading ...
Loading ...
Loading ...
31Unlocking and locking
Changing the battery
Fig. 15 Vehicle key: bat-
tery compartment cover
Fig. 16 Vehicle key: re-
moving the battery
SEAT recommend having the batteries changed in a Specialised workshop.
The battery is located to the rear of the vehicle key, under a cover.
Changing the battery
Unfold the key shaft ⇒ page 29.
Remove the cover from the back of the vehicle key ⇒ Fig. 15 in the direc-
tion of the arrow ⇒ 
.
Extract the battery from the compartment using a suitable thin object
⇒ Fig. 16.
Place the new battery in the compartment, pressing as shown ⇒ Fig. 16
in the opposite direction to the arrow ⇒ 
.
Fit the battery compartment cover, pressing in the direction of the arrow
as shown ⇒ Fig. 15 until it clicks into place.
CAUTION
If the battery is not changed correctly, the vehicle key may be damaged.
Use of unsuitable batteries may damage the vehicle key. For this reason,
always replace the dead battery with another of the same voltage, size and
specifications.
When fitting the battery, check that the polarity is correct.
For the sake of the environment
Please dispose of your used batteries correctly and with respect for the envi-
ronment.
To synchronise the vehicle key
If the button
is pressed frequently outside of the vehicle range, it is pos-
sible that the vehicle can no longer be locked or unlocked using the key. In
this case, synchronise the vehicle key once more as follows:
Unfold the key shaft
⇒ 
page 29.
Press the button
on the vehicle key. For this, you must remain next to
the vehicle.
Vehicle diagram Prior to a journey... While driving Care, cleaning and mainte-
nance
If and when Technical Data
Loading ...
Loading ...
Loading ...