Loading ...
Loading ...
Loading ...
271Practical information
Only carry out the operations in the sequence indicated:
1.
Always take the checklist into account and take the necessary ac-
tions ⇒ page 265.
2.
With one hand, press on the number plate light from left to right
and remove it from the bumper ⇒ Fig. 155.
3. Detach the number plate light carefully from the bumper.
4.
Turn the bulb holder with the bulb anticlockwise and remove it in
the direction of the arrow ⇒ Fig. 156.
5. Replace the faulty bulb by a new identical bulb.
6.
Place the bulb holder in the number plate light and press in the op-
posite direction to the arrow as far as possible ⇒ Fig. 156.
7.
Insert the number plate light carefully into the left edge of the open-
ing on the bumper. During this process, check that the assembly di-
rection of the number plate light is correct, i.e. the spring must be
on the right.
8.
Insert the number plate light into the bumper until it audibly clicks
into place.
Changing the side turn signal bulb
Fig. 157 Removing the
side turn signal
Fig. 158 Side turn sig-
nal: Changing the bulbs
Only carry out the operations in the sequence indicated:
1.
Always take the checklist into account and take the necessary ac-
tions ⇒ page 265.
2. With one hand move the side turn signal backwards ⇒ Fig. 157
1
.
Vehicle diagram Prior to a journey... While driving Care, cleaning and mainte-
nance
If and when Technical Data
Loading ...
Loading ...
Loading ...