Loading ...
Loading ...
Loading ...
267Practical information
Complete operations only in the sequence given:
⇒ Fig. 150
A B C
Dipped beam and main beam headlights Side light and daytime driving light Turn signals (front)
6.
Insert the bulb, return it to its position and
insert the retaining clip
D
.
Insert the bulb holder in the headlight and
turn it clockwise as far as the stop.
Insert the bulb holder in the headlight and
turn it clockwise as far as the stop.
7.
Place the rubber cover and check that is
correctly in position. Insert the connector
to the bulb H4.
Note
The images show the left hand headlight from behind. The structure of the
right hand side headlight is symmetric.
Replacing the front bumper bulbs
Fig. 151 In the front
right wheel arch: Remove
the retaining screws (ar-
rows) and take out the
expansive rivet
A
.
Fig. 152 Changing the
bulbs in the headlights
Complete operations only in the sequence given:
1.
Always take the checklist into account and take the necessary ac-
tions ⇒ page 265.
2.
Unscrew the 2 retaining screws of the wheel arch trim ⇒ Fig. 151
(arrows) with the screwdriver from the vehicle took kit ⇒ page 246.
3.
Unscrew the expansive rivet in the lower front part of the wheel arch
trim
A
with the screwdriver from the vehicle tool kit and complete-
ly remove it ⇒ page 246.
4. Carefully fold the wheel arch trim to the side.
5. Release the connector ⇒ Fig. 152
1
and remove it.
Vehicle diagram Prior to a journey... While driving Care, cleaning and mainte-
nance
If and when Technical Data
Loading ...
Loading ...
Loading ...