Owner’s Manual - Page 170

For MII 2012.

Loading ...
Loading ...
Loading ...
168 Air control
The air conditioning operates most effectively with the windows closed.
However, if the vehicle has heated up after standing in the sun for some
time, the air inside can be cooled more quickly by opening the windows
briefly.
Setting for conditions of optimal visibility
When the air conditioning system is switched on, the temperature and the
air humidity in the vehicle interior drop. Hence, when the outside air humid-
ity is high, the windows do not mist over and comfort for the vehicle occu-
pants is improved:
Disable air recirculation mode ⇒ page 169.
Set the fan to the required setting.
Turn the temperature control to the centre position.
Open and direct the air outlets in the dash panel ⇒ page 169.
Turn the air distribution control to the defrost position.
Press the
AC
button to turn on cooling. The button will light up.
The cooling system does not switch on
If the air conditioning system cannot be switched on, this may be caused by
the following:
The engine is not running.
The fan is switched off.
The air conditioner fuse has blown.
The outside temperature is lower than approximately +2 °C (+36 °F).
The air conditioner compressor has been temporarily switched off be-
cause the engine coolant temperature is too high.
Another fault in the vehicle. Have the air conditioner checked by a Speci-
alised workshop.
Things to note
If the humidity and temperature outside the vehicle are high, condensation
can drip off the evaporator in the cooling system and form a pool under-
neath the vehicle. This is normal and does not indicate a leak!
Note
After starting it, any residual humidity in the air conditioner could mist over
the windscreen. Switch on the defrost function as soon as possible to clear
the windscreen of condensation.
Loading ...
Loading ...
Loading ...