Loading ...
Loading ...
Loading ...
II
91
Stopping the function
- by an action on the control on
position «LIM» to position 0.
- by the engine stopping.
The speed previously chosen is
still memorised.
If there is a malfunction, a mes-
sage will display accompanied by
a sound signal and lighting of the
SERVICE warning lamp.
Contact a CITROËN dealer.
Temporary override of the
maximum speed
The accelerator pedal is equipped
with an end-of-travel switch. If you
action this switch by pressing the
pedal hard down, you can exceed
the memorised maximum speed
at any time.
During the time the speed is being
exceeded, the displayed speed
flashes.
You have only to release the ac-
celerator pedal to return below the
maximum speed and render the
function active again.
Observation : If during the operation
of the speed limiter, the system is
unable to keep within the maximum
speed (for example on a steep de-
scent or under heavy acceleration)
then the speed flashes. Adapt your
speed as necessary
.
The function will re-engage when
your speed returns below the de-
sired maximum speed.
Disengagement of the
maximum speed
Press on button 3.
This action causes the information
«OFF» to appear on the instru-
ment panel screen.
Use of floor mats that are not approved by CITROËN
may hinder access to the accelerator pedal and thus interfere
with the functioning of the speed limiter.
This action does not cancel the
memorised maximum speed which
remains displayed in zone A of the
instrument panel.
SPEED LIMITER
Loading ...
Loading ...
Loading ...