Loading ...
Loading ...
Loading ...
A
68
II
The electronic parking brake com-
bines 2 operational modes :
- AUTOMATIC :
Automatic application when the
engine stops and automatic re-
lease on use of the accelerator
(automatic operation by default),
- MANUAL :
Permanent manual application /
release of the parking brake is
possible by pulling control A.
AUTOMATIC OPERATION
To start the vehicle
The electronic parking brake re-
leases automatically and pro-
gressively when you press the
accelerator :
- with a manual gearbox (first
gear or reverse gear engaged),
press down fully on the clutch
pedal then press on the accelera-
tor pedal and move off.
- with an automatic gearbox, ac-
celerate with the selector in posi-
tion D, M or R.
- with an electronic gearbox, ac-
celerate with the selector in posi-
tion A, M or R.
When stationary, with the engine
running, do not press the
accelerator pedal unnecessarily, as you
may release the parking brake.
To immobilise the vehicle
Immobilisation, engine off
With the vehicle stationary, the park-
ing brake is automatically applied
when the engine is switched off.
E L E C T R O N I C PA R K I N G B R A K E
Full release of the parking
brake is confirmed by :
- the extinction of warning lamp P on
control A and on the instrument panel,
- the display of a message « park-
ing brake released » on the mul-
tifunction display.
Before leaving the vehicle,
check that warning lamp P on
the instrument panel is
permanently lit.
Never leave a child alone inside
the vehicle with the ignition on,
as they could release the
parking brake.
The application of the park-
ing brake is confirmed by :
- the lighting of warning lamp P on
control A and on the instrument
panel,
- the display of a message « park-
ing brake applied » on the multi-
function display (except DT).
Note : an operation sound will
confirm to you the application/re-
lease of your electronic parking
brake.
Loading ...
Loading ...
Loading ...