Loading ...
Loading ...
Loading ...
152
IV
Manual pre-setting
Select the waveband and memory
bank required using button E.
Select a station using either auto-
matic or manual search.
Keep pressing for more than two
seconds on one of the pre-selection
buttons 1 to 6 on the keypad P.
The sound momentarily cuts off,
then returns to its previous level to
confirm that it has memorised the
station.
Automatic memorisation of
transmitters
(Autostore function)
In FM, if you hold down button E
for more than two seconds, your
radio will automatically memorise
the 6 strongest stations on the
FM3 memory bank.
The display shows “FM AST”.
The radio memorises the 6 strong-
est transmitters, deleting the
6 previously memorised.
After the memorisation, the ra-
dio goes directly to memory 1 of
memory bank FM3.
Note :
- If the traffic information function
has been activated (see RDS
SYSTEM), the stations offering
this facility will be memorised as
priority.
- If it is unable to memorise any
new stations, the system will re-
tain the previously memorised
stations.
- If the system is unable to find
6 stations, the unfilled memory
slots will remain free.
Recall of pre-set stations
Press button E briefly to select the
required waveband and memory
bank.
A short press on one the pre-
selection buttons 1 to 6 on the
keypad P recalls the correspond-
ing memorised station. You can
also do this using the control 3 at
the steering wheel.
If it is a RDS station, the frequency
appears some seconds before the
name appears.
For RDS stations, recall of a sta-
tion may prompt a search for a
frequency corresponding to the
region where you happen to be
(see RDS system).
RADIO SOURCE
Loading ...
Loading ...
Loading ...