Loading ...
Loading ...
Loading ...
II
59
Starting the engine
1. To start the engine, the selec-
tor has to be in position N.
2.
Press firmly on the brake pedal
.
3. Action the starter.
4. When the engine is running,
place the selector on R, A or
M as desired.
5. Check, in the instrument pan-
el, the position engaged.
6. Release the brake pedal and
accelerate.
Note : If the selector is not in po-
sition N, and/or if the brake pedal
is not pressed, the correspond-
ing warning lamp(s) display and a
message informs you that at least
one of these two conditions is not
met.
In this case, the engine will not
start, recommence the above pro-
cedure.
Using the 6-speed electronic
gearbox
Reverse gear
Engaging reverse gear
To engage reverse gear, move the
selector to R.
Only attempt to change to reverse
gear when the vehicle is stationary
.
Automatic mode
Changing to automatic mode
To change to automatic mode,
move the selector to A.
Manual mode
Changing to manual mode
Manual mode activates when you
move the selector to M.
- Pull the lever « + » to change up
a gear.
- Pull the lever « - » to change
down a gear.
When the engine is running,
before accelerating to move
the vehicle, make sure that the
position engaged on the
selector grille or in the
instrument panel is either :
R, A or M
.
Do not leave the vehicle with
the engine running in R, A or M
.
If the vehicle is moving rapidly, if
an inadvertent attempt to engage
reverse gear is made, the warning
lamp N will flash and your vehicle
will go automatically into neutral.
To re-engage a gear, you have only
to reposition the selector on A, M
or R.
(6-SPEED) ELECTRONIC GEARBOX SYSTEM - GENERAL
Neutral
Changing to neutral
To change to neutral, move the
selector to N. If the vehicle is mov-
ing, do not select this position
even momentarily.
Loading ...
Loading ...
Loading ...