Loading ...
Loading ...
Loading ...
A
1
3
4
2
88
II
This driving assistance device
enables you to drive at a constant
speed of your choice, without the
need to action the accelerator. It
is active over speeds of around
40 km/h (approx. 25 mph).
The cruise control commands are
located on the steering wheel.
Note : The information relating to
the cruise control is displayed in
zone A of the instrument panel.
Selection of the function
Rotate the control 1 to the «REG»
position.
Selection of a cruise
speed
On selection of the
function via control
1, no cruise speed
has yet been memo-
rised.
Once the desired speed has been
reached via action on the accel-
erator, press button 2 or button 4.
The cruise speed is then memo-
rised. It is displayed in zone A of
the instrument panel.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
Note : The speed of your vehicle
may vary slightly in relation to that
memorised.
If during the operation of cruise
control, the system is unable to
keep within the memorised speed
(for example on a steep descent),
then the speed flashes. Adapt your
speed as necessary.
Bi-tone instrument panel
Adjustment of the memorised
speed while cruise control is in
operation
You can adjust the memorised
speed, displayed in zone A, by
pressing on :
- button 4 to increase the speed,
- button 2 to decrease the speed.
Note : successive presses will
modify the cruise speed in steps of
1 km/h and a sustained press in
steps of 5 km/h (3 mph).
Temporary override of the
cruise speed
During the operation of cruise con-
trol, it is always possible to action
the accelerator to go faster than the
cruise speed (for example to over-
take another vehicle). The speed
displayed in zone A flashes.
You have only to release the ac-
celerator pedal to return to the
cruise speed.
CRUISE CONTROL
Loading ...
Loading ...
Loading ...