Loading ...
Loading ...
Loading ...
IV
151
RADIO SOURCE
Notes on radio reception
Your radio will be subject to certain
phenomena that are not encoun-
tered by domestic systems.
The reception of AM and FM sig-
nals may suffer from interference,
which is caused by the nature and
propagation of the signals and
does not reflect on the quality of
your radio installation.
In AM, the reception may be af-
fected when passing under power
lines or bridges, or when travelling
through tunnels.
In FM mode, the reception may be
affected by the distance from the
station transmitter, the reflecting of
signals off obstacles (mountains,
hills, tower blocks) and radio blacks-
pots (no coverage from the station
transmitter).
Selection of radio source
Press button D to select the source.
Selection of frequencies and
memory banks
Press button E successively to go
through the memory banks FM1,
FM2 and FM3, for the FM wave-
band, and the memory banks MW/
LW, for the AM waveband.
Manual search
Manual seearch is via buttons J
or M.
By keeping button J or M pressed,
you will be able to scroll through
the waveband. Scrolling will stop
as soon as you release the button.
The radio will remain tuned to the
frequency that is displayed.
Tuning sensitivity
Automatic searches can be car-
ried out according to two levels of
sensitivity :
- To capture the most powerful trans-
mitters, choose the local search
mode “LO” (default option).
- To capture the weakest or most
distant transmitters, choose the
sensitive search mode “DX”.
Search for a station is done first
in “LO” (local) sensitivity, then in
“DX” (distant) sensitivity.
To commence a search in sensi-
tivity “DX” (distant) immediately ,
press twice in succession on one
of the buttons K or N.
Automatic search
A short press on one of the but-
tons K or N will tune into higher or
lower radio stations respectively,
within the chosen waveband.
By keeping button K or N pressed,
you will be able to scroll through
the waveband. The scrolling will
stop at the first station it finds once
the button is released.
You can also do this by means of
control 2 at the steering wheel.
If the automatic search is unable
to tune into a known frequency
(perhaps owing to very weak re-
ception), it is possible to search
manually to find this station.
Display and selection of a
station available in the area in
which you are travelling
Briefly press on button G to bring
up a list of stations, this is updated
every 10 minutes.
You can also update this list at
any time by giving a long press on
button G.
To listen to one of these stations,
select by pressing buttons J or M
and validate using button L.
Loading ...
Loading ...
Loading ...