Loading ...
Loading ...
Loading ...
A
II
69
Immobilisation, engine running
With the engine running and the
vehicle stationary, in order to im-
mobilise the vehicle you need to
manually apply the parking brake
by pulling on control A.
The application of the park-
ing brake is confirmed by :
- the lighting of warning lamp P on
control A and on the instrument
panel,
- the display of a message « park-
ing brake applied » on the multi-
function display.
When the driver’s door is opened,
a beep is heard and a message
displayed if the parking brake has
not been applied.
ACTIVATION / DEACTIVATION OF
THE AUTOMATIC FUNCTIONS
The automatic application when the en-
gine is switched off and the automatic
release when you press the accelerator
can be deactivated. Activation / deacti-
vation is performed using the Menu of
the instrument panel screen. To do so,
select « Personalisation/Configuration /
Define the Vehicle parameters / Driving
assistance / Automatic handbrake ».
The deactivation of these
functions is confirmed by the
lighting of this warning lamp
on the instrument panel.
With the automatic functions de-
activated, the application and re-
lease of the parking brake are
done manually.
The full application of the park-
ing brake is confirmed by :
- the extinction of the warning
lamp on control A and of warning
lamp P on the instrument panel,
- the display of a message « park-
ing brake released » on the mul-
tifunction display.
Note : If you pull control A
without pressing the brake
pedal, the parking brake
will not be released and the
« foot on brake » warning lamp will
light up on the instrument panel.
To immobilise the vehicle
With the vehicle stationary, to ap-
ply the parking brake whether the
engine is running or off, pull on
control A.
E L E C T R O N I C PA R K I N G B R A K E
Before leaving the vehicle, check
that warning lamp P on the
instrument panel is permanently lit.
The deactivation of the automat-
ic functions is recommended in
particularly cold conditions (ice)
and during towing (breakdown,
caravan, ...)
MANUAL OPERATION
Manual application / release of the
parking brake is always possible.
To start the vehicle
With the ignition on or the engine
running, to release the parking
brake, press on the brake pedal,
pull then release control A.
The application of the park-
ing brake is confirmed by :
- the lighting of the warning lamp
on control A and of warning lamp
P on the instrument panel,
- the display of a message « park-
ing brake applied » on the multi-
function display.
When the driver’s door is opened
with the engine running, a beep is
heard and a message displayed
if the parking brake has not been
applied.
Loading ...
Loading ...
Loading ...