Loading ...
Loading ...
Loading ...
7
ENGLISH
Keep the following precautions in mind to prevent the temperature rise inside
the projector:
− Install the air vents at least 30 cm (11.8 inches) away from the wall.
− Do not install the product in a place where it cannot be ventilated, such as on a
bookcase or in a closet.
− Do not install the product on carpet or cushion.
− Make sure that the air vents are not blocked with tablecloths, curtains, etc.
• It may cause a fire.
For places where oil or oil mist can reach, do not install the product on a wall
or ceiling.
• The product may be damaged and fall.
Do not allow a child to hang or climb on the installed projector.
• The projector may fall and cause injury or death.
When installing the product on the ceiling, observe the following precautions
to prevent the projector from falling:
− Contact the Customer Support Center for installation.
− Tighten the product by using the mounting equipment and M4 x 8 mm screws
that are approved by a professional technician.
− Do not use adhesive, lubricant, oil, etc. when using the mounting equipment.
− Do not tighten the screws with an excessive force since the projector may fall
due to breakage of the screw connection part. (the recommended torque: 5-8
kgf.cm (4.34-6.94 lbf-in))
• A failure to follow the precautions may result in injury or death and product
damage due to the fall of the product.
Loading ...
Loading ...
Loading ...