Loading ...
Loading ...
Loading ...
Tyre and Axle Recognition Unit User Manual
53
12.2 Set IP Address Filtering
You can set the IP addresses allowable and not allowable to access the device.
Steps
1. Go to Configuration → System → Security → Security Settings.
2. Check Enable IP Address Filtering.
3. Set Filtering Mode.
Blocklist Mode
The added IP addresses are not allowed to access the device.
Allowlist Mode
The added IP addresses are allowed to access the device.
4. Click Add, enter the IP address, and click OK.
Note
The IP address only refers to the IPv4 address.
5. Optional: Edit, delete, or clear the added IP addresses.
6. Click Save.
12.3 Enable User Lock
To raise the data security, you are recommended to lock the current IP address.
Steps
1. Go to Configuration → System → Security → Security Service → Software.
2. Check Enable User Lock.
3. Click Save.
Result
When the times you entered incorrect passwords have reached the limit, the current IP address
will be locked automatically.
12.4 Set HTTPS
12.4.1 Create and Install Self-signed Certificate
HTTPS is a network protocol that enables encrypted transmission and identity authentication,
Loading ...
Loading ...
Loading ...