Loading ...
Loading ...
Loading ...
Tyre and Axle Recognition Unit User Manual
9
Note
Enabling composition and outputting close-up independently functions conflict with each other.
You can only enable one.
6. Click Save.
3.2.4 Set Information Overlay
If you want to overlay information on the captured single pictures, set capture overlay.
Steps
Note
The supported parameters vary with different models. The actual device prevails.
1. Go to Configuration → Capture → Capture Parameters → Text Overlay.
2. Check Capture Picture Overlay.
Figure 3-5 Set Single Picture Overlay
3. Set the percentage, front size, color, overlay position, etc.
Percentage
It is the percentage that the overlaid information occupies on the picture. For example, if you
set the percentage to 50, the overlaid information in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Transparency
It is the condition of viewing the live view image through the overlaid information.
Overlay Number Zeroizing
When the overlaid number digits are smaller than the fixed digits, 0 will be overlaid before
Loading ...
Loading ...
Loading ...