Loading ...
Loading ...
Loading ...
Tyre and Axle Recognition Unit User Manual
6
It is used to adjust stitching completeness. The larger the value is the more complete the
image stitching will be.
Lower Stitching Edges
It is used to adjust the stitching targets amount and the default value is 50.
Front View Detection Mode
It is used to optimize the stitching image and the default value is 0.
Calibrate Lane Width in Live View (mm)
The distance from the leftmost to the rightmost side of the lane in the image.
6. Optional: Check the other lane(s) to copy the same settings.
7. Draw lane lines.
1) Click Draw Lane Line.
2) Select the default lane lines, trigger line, and right border line, and drag the two end points of
the line or drag the whole line to adjust its position according to the actual scene.
3) Click OK.
8. Click Save.
3.2 Set Capture Parameters
3.2.1 Set License Plate Recognition Parameters
When there are vehicles of different types passing from different directions, set the license plate
recognition parameters.
Steps
1. Go to Configuration → Capture → Capture Parameters → License Parameters.
Figure 3-2 Set License Plate Recognition Parameters
2. Set Country/Region according to the actual needs.
3. Select License Plate Recognition.
–
Select Forward when license plates of vehicles from the approaching direction need to be
recognized.
–
Select Backward when license plates of vehicles from the leaving direction need to be
recognized.
Loading ...
Loading ...
Loading ...