Loading ...
Loading ...
Loading ...
Tyre and Axle Recognition Unit User Manual
23
7.1.2 Set FTP
Set FTP parameters if you want to upload the captured pictures to the FTP server.
Before You Start
Set the FTP server, and ensure the device can communicate normally with the server.
Steps
1. Go to Configuration → Network → Data Connection → FTP.
Figure 7-2 Set FTP
2. Check Enable FTP.
3. Set FTP Parameters.
1) Select Sever Address Type and enter corresponding information.
2) Enter Port.
3) Enter User Name, Password, and confirm the password.
4) Select Protocol Type.
5) Select Directory Structure and Connection Mode.
Note
You can customize the directory structure according to your needs.
4. Optional: Enable upload functions.
Note
Supported functions vary with different models. The actual device prevails.
Not Upload Plate Close-up
The close-up pictures of a license plate will not be uploaded.
Upload Additional Information to FTP
Add related information when uploading data to the FTP server.
Upload CSV Vehicle Passing Statistics Information to FTP
Loading ...
Loading ...
Loading ...