Loading ...
Loading ...
Loading ...
26
English
Safety precautions
INSTALLATION PARTS
Installing the unit
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the
electrical lines. Always disassemble the electric lines before the refrigerant tubes.
• Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product
appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if
the installer or the authorized technician has collected the material from the retailer.)
• After completing the installation, always carry out a functional test and provide the instructions on how
to operate the air conditioner to the user.
• Do not use the air conditioner in environments with hazardous substances or close to equipment that
release free flames to avoid the occurrence of fires, explosions or injuries.
• Our units must be installed in compliance with the spaces indicated in the manual to ensure either
accessibility from both sides or ability to perform routine maintenance and repairs. The units’
components must be accessible and that can be disassembled in conditions of complete safety either
for people or things. For this reason, where it is not observed as indicated into the manual, the cost
necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings,
trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end
user.
Power supply line, fuse or circuit breaker
• Always make sure that the power supply is compliant with current safety standards. Always install the
air conditioner in compliance with current local safety standards.
• Always verify that a suitable grounding connection is available.
• Verify that the voltage and frequency of the power supply comply with the specifications and that the
installed power is sufficient to ensure the operation of any other domestic appliance connected to the
same electric lines.
• Always verify that the cut-off and protection switches are suitably dimensioned.
• Verify that the air conditioner is connected to the power supply in accordance with the instructions
provided in the wiring diagram included in the manual.
• Always verify that electric connections (cable entry, section of leads, protections…) are compliant with
the electric specifications and with the instructions provided in the wiring scheme. Always verify that all
connections comply with the standards applicable to the installation of air conditioners.
• Be sure not to perform power cable modification, midway wiring, and multiple wire connection.
ࣕ It may cause electric shock or fire due to poor connection or insulation and current limit override.
ࣕ When midway wiring is required due to power line damage, refer to "How to connect your extended
power cables" in the installation manual.
ki]_TXX^ZXjTWWpiptwhjGz{jluUGGGY] YWYYTW[TW_GGG㝘㤸G`aXYa[\
Loading ...
Loading ...
Loading ...