Loading ...
Loading ...
Loading ...
24
English
Troubleshooting
USING PARTS
Problem Solution
Timer function is
not working.
Check if the air conditioner is off. Turn the air conditioner on and set the Timer
function.
When the timer is already set icon will appear on the indoor unit display, check to
see if the timer is already set.
Odors permeate in
the room during
operation.
Odor may permeate depending on the surrounding environment or operating
condition. Ventilate the indoor air or operate Fan mode for 1~2 hours if the odor does
not go away. (Parts of the air conditioner does not generate any odor)
Clean the air filter if it is dirty.
Error is indicated.
If the message
, , , , , , , , ,
, , , , , , , , , blink on the
indoor unit display, it means there is a problem so you should contact a service
center.
Noise is generated.
Depending on the status of the air conditioner usage (especially when the outdoor
temperature is below 20°C), noise can be generated due to changes in refrigerant
flow. You don’ t have to worry since it is normal.
Water is dropping
from the
connection part of
the drain pipe.
Water may be generated because of the temperature difference. It is normal.
Indoor unit display
is blinking.
Press the On/Off button and check if the display keeps blinking.
Turn off the auxiliary power switch and turn it on.
If the display keeps blinking after following above 2 instructions, contact the service
center.
Heat is generated
from the control
panel on the indoor
unit.
When the air conditioner is on, little bit of heat may be generated from the control
panel. It is normal.
Air conditioner is
not turning off.
After turning off the air conditioner, it may generate breeze for certain period of
time for defrosting. It is normal.
ki]_TXX^ZXjTWWpiptwhjGz{jluUGGGY[ YWYYTW[TW_GGG㝘㤸G`aXYa[\
Loading ...
Loading ...
Loading ...