Loading ...
Loading ...
Loading ...
SDS6000A Series Digital Oscilloscope User Manual
16 int.siglent.com
No manual voltage selection is required because the instrument automatically
adapts to line voltage.
Depending on the type and number of options and accessories (probes, PC
port plug-in, etc.), the instrument can consume up to 193 W of power.
Note: The instrument automatically adapts to the AC line input within the
following ranges:
Voltage Range:
90 - 264 Vrms
90 - 132 Vrms
Frequency Range:
47 - 63 Hz
380 - 420 Hz
The instrument includes a grounded cord set containing a molded three-
terminal polarized plug and a standard IEC320 (Type C13) connector for
making line voltage and safety ground connection. The AC inlet ground
terminal is connected directly to the frame of the instrument. For adequate
protection against electrical shock hazards, the power cord plug must be
inserted into a mating AC outlet containing a safety ground contact. Use only
the power cord specified for this instrument and certified for the country of
use.
Warning: Electrical Shock Hazard!
Any interruption of the protective conductor inside or outside
of the scope, or disconnection of the safety ground terminal
creates a hazardous situation.
Intentional interruption is prohibited.
Loading ...
Loading ...
Loading ...