Loading ...
Loading ...
Loading ...
SDS6000A Series Digital Oscilloscope User Manual
1 7 0 int.siglent.com
CAN FD Trigger and Serial Decode
This section covers triggering and decoding CAN FD signals. Please read the
following for more details: "CAN FD Signal Settings", "CAN FD Trigger" and
"CAN FD Serial Decode".
17.8.1 CAN FD Signal Settings
Connect the CAN FD signal to the oscilloscope, and then set the threshold level
of the signal. The process of specifying the source and threshold is similar to
"I2C Signal Settings".
In BusConfig menu of trigger and decode, the nominal baud rate can be set to:
10 kb/s, 25 kb/s, 50 kb/s, 100 kb/s, 250 kb/s, 1 Mb/s or Custom. The data baud
rate can be set to: 500 kb/s, 1 Mb/s, 2 Mb/s, 5 Mb/s, 8 Mb/s, 10 Mb/s or Custom.
The method of copying settings is the same as I2C signal settings. See "I2C
Signal Settings" for details.
17.8.2 CAN FD Trigger
Touch Trigger Setting in the CAN FD trigger dialog box to set the trigger
conditions:
Loading ...
Loading ...
Loading ...