Loading ...
Loading ...
Loading ...
SDS6000A Series Digital Oscilloscope User Manual
int.siglent.com 107
Slope-- Trigger when an edge crosses two thresholds which lie inside or
outside a selected time range
Pulse--Trigger at the end of a pulse when the pulse width lies inside or
outside a selected time range
Video--TV trigger on falling edge
Window--Trigger when the signal leaves the widow region.
Interval--Trigger on the second edge when the time between the edges is
inside or outside a selected time range
Dropout--Trigger when the signal disappears for longer than the Dropout
value.
Runt--Trigger when a pulse crosses the 1st threshold but not the 2nd before
re-crossing the 1
st
threshold again
Pattern-- Trigger when pattern condition transitions from false to true. All
inputs set to DC coupling
Serial--Trigger on specified condition in a serial bus. See the chapter "Serial
Trigger and Decode" for details.
Qualified -- Trigger with edge trigger setting only after the qualifying
condition is satisfied
Nth Edge –Trigger on the Nth edge of a burst that occurs after a specified
idle time
Delay --Trigger when the delay time between source A and source B meets
the limit condition
Setup/Hold --Trigger when the setup time or hold time meets the limit
condition
Loading ...
Loading ...
Loading ...