Loading ...
Loading ...
Loading ...
zone. The display shows the heat setting
( ).
6.6 The heat setting
Set the cooking zone.
Touch
to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.
6.7 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
zone: select the cooking zone. Touch
and at the same time. comes on.
Touch again. comes on. Select the
correct heat setting within 3 seconds.
After 5 seconds
comes on again.
Zone is running with the heat setting 9.
After some time zone sets back to
selected heat setting
To deactivate the function: touch
.
6.8 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: first set the cooking zone and than
set the maximum heat setting. Touch
until comes on.
To deactivate the function: touch .
6.9 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
To activate the function: touch .
comes on.
To deactivate the function: touch .
The previous heat setting comes on.
6.10 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch for 3
seconds. Touch for 3 seconds. On the
left front zone display comes on and
on the right front zone display
or
comes on. Touch sensor field for the
right rear zone to choose one of the
following:
• - the sounds are off
• - the sounds are on
When the function is set to
you can
hear the sounds only when:
• you touch
• there is an error in the hob.
6.11 Power management
function
• Cooking zones are grouped according
to the location and number of phases
in the hob. See the illustration.
• Each phase has a maximum
electricity load.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity load of the cooking zones
connected to a single phase is
exceeded.
• The function reduces the power of the
other cooking zones connected to the
same phase.
• The heat setting display of the
reduced zones changes between two
levels.
ENGLISH 13
Loading ...
Loading ...
Loading ...