FLUKE 284-U User Manual for the Fluke 284-U Arbitrary Waveform Generator and Manager, 40 MS/s, 4 Channel

Loading ...

B-1

Appendix B

Warning and Error Messages

Warning messages are given when a setting may not give the expected result, e.g. DC

Offset attenuated by the output attenuator when a small amplitude is set; the setting is,

however, implemented.

Error messages are given when an illegal setting is attem

pted; the previous setting is

retained.

The last two warning/error messages can be reviewed by selecting LAST ERROR from

the UTILITY

screen, the latest is reported first.

Warning and error messages are reported with a num

ber on the display; only the number

is reported via the remote control interfaces.

The following is a complete list of messages as they appear on the display.

Warning Messages

00 No errors or warnings have been reported

13 DC offset changed by amplitude

14 Offset + SUM + level may cause clipping

23 Offset will clip the waveform

24 Instrument not calibrated

30 Amplitude will clip the waveform

42 Trigger source is fixed to external in SWP/SLAVE mode

43 Arb repeated in two seq segs so SEQ SYNC may not be correct

59 Trigger slope is fixed to positive in SWEEP/SLAVE mode

81 The programmed mod depth cannot be set

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 284-U Arbitrary Waveform Generator and Manager, 40 MS/s, 4 Channel