Loading ...
Loading ...
Loading ...
281, 282, 284
Users Manual
16-16
ARBDATA? <cpd> Returns the data from an existing arbitrary
waveform.
<cpd> m
ust be the name of an existing
arbitrary waveform.
The data consists of binary coded values as
specified for the ARBDATA
command.
The data is sent from the arbitrary
waveform between the points specified by
the ARBEDLMTS command.
This command cannot be used over the
RS232 interfa
ce since it contains a binary
data block.
ARBRESIZE <cpd>,<nrf> Change the size of arbitrary waveform
<cpd>
to <nrf>.
ARBRENAME <cpd1>,<cpd2> Change the name of arbitrary waveform
<cpd1>
to <cpd2>.
ARBPOINT <cpd>,<nrf1>,
<nrf2>
Set the waveform point at address
<nfr1>
in arbitrary waveform <cpd>
to <nrf2>.
ARBLINE <cpd>,<nrf1>,
<nrf2>,<nrf3>,<nrf4>
Draw a line in arbitrary waveform <c
pd>
from start address and data <nrf1> and
<nrf2> to stop address and data
<nrf3> and <nrf4>.
ARBINSSTD <cpd1>,<cpd2>,
<nrf1>,<nrf2>
Insert the standard waveform <cpd2>
into the arbitrary waveform <cpd1>
from start address <nrf1> to stop
address <nrf2>.
<cpd2> m
ust be one of <SINE>,
<SQUARE>, <TRIANG>, <DC>,
<POSRMP>, <NEGRMP>, <COSINE>,
<HAVSIN>, <HAVCOS>, or <SINC>
and <cpd1> must be an existing
arbitrary waveform.
ARBINSARB <cpd1>,<cpd2>,
<nrf1>,<nrf2>
Insert the arbitrary waveform <cpd2>
into arbitrar
y waveform <cpd1>.
Use that part of <cpd2>
specified by the
ARBEDLMTS command and insert from
start address <nrf1> to the stop address
<nrf2>.
<cpd1> and <cpd2>
must both be
existing arbitrary waveforms but they
cannot be the same waveform.
ARBCOPY <cpd>,<nrf1>,
<nrf2>,<nrf3>
Block copy in arbitrary waveform <c
pd>
the data in the address range <nrf1> to
<nrf2> to destination address <nrf3>.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...