Loading ...
Loading ...
Loading ...
281, 282, 284
Users Manual
16-18
TONEEND <nrf> Delete tone frequency number <nrf>,
thus defining the end of the list.
TONEFREQ <nrf1>,<nrf2>,
<nrf3>
Set tone frequency number <nrf1>
to
<nrf2> Hz. The third parameter sets the
tone type; 1 will give trig, 2 will give FSK,
any other value gives gate.
SWPSTARTFRQ <nrf> Set the sweep start frequency to <nrf
>
Hz.
SWPSTOPFRQ <nrf> Set the sweep stop frequency to <nrf
>
Hz.
SWPCENTFRQ <nrf> Set the sweep centre frequency to <nrf
>
Hz.
SWPSPAN <nrf> Set the sweep frequency span to <nrf>
Hz.
SWPTIME <nrf> Set the sweep time to <nrf>
sec.
SWPTYPE <cpd> Set the sweep type to <CO
NT>,
<TRIG>, <THLDRST> or <MANUAL>.
SWPDIRN <cpd> Set the sweep direction to <UP>
,
<DOWN>, <UPDN> or <DNUP>.
SWPSYNC <cpd> Set the sweep sync <ON>
or <OFF>.
SWPSPACING <cpd> Set the sweep spacing to <
LIN> or
<LOG>.
SWPMKR <nrf> Set the sweep marker to <nrf> Hz.
SWPMANUAL <cpd> Set the sweep manual parameters to
<UP>
, <DOWN>, <FAST>, <SLOW>,
<WRAPON> or <WRAPOFF>.
Input/Output control
OUTPUT <cpd> Set the main output <ON>, <OFF>
,
<NORMAL> or <INVERT>.
SYNCOUT <cpd> Set the sync output <ON>
, <OFF>
,
<AUTO>, <WFMSYNC>, <POSNMKR>,
<BSTDONE>, <SEQSYNC>,
<TRIGGER>, <SWPTRG> or
<PHASLOC>.
TRIGOUT <cpd> Set the trig output to <AU
TO>,
<WFMEND>, <POSNMKR>, <SEQSYNC>
or <BSTDONE>.
TRIGIN <cpd> Set the trig input to <INT
>, <EXT>,
<MAN>, <PREV>, <NEXT>, <POS> or
<NEG>.
TRIGPER <nrf> Set the internal trigger generator period to
<nrf>
sec.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...