Loading ...
Loading ...
Loading ...
Remote Operation
Remote Commands16
16-21
QER? Query and clear query the error number
register. The response format is nr1<rmt>.
Miscellaneous Commands
*
LRN? Returns the complete set-up of the instrument
as a hexadeci
mal character data block. To re-
install the set-up the block should be returned
to the instrument exactly as it is received.
The syntax of the response is LRN
<Character data><rmt>
.
The settings in the instrument are not affected
by
execution of the
*
LRN? command.
LRN <character data> Install data for a previous
*
LRN?
co
mmand.
*
RST Resets the instrument parameters to their
default values (see Appendix).
*
RCL <nrf> Recalls the instrument set up contained in
store num
ber <nrf>. Valid store numbers
are 0 - 9. Recalling store 0 sets all parameters
to the default settings (see Appendix).
*
SAV <nrf> Saves the complete instrument set up in the
store num
ber <nrf>. Valid store numbers
are 1 - 9.
*
TRG This command is the same as pressing the
MAN T
RIG key. Its effect will depend on the
context in which it is assert
ed. The interface
command Group Execute Trigger (GET) will
perform the same action as
*
TRG.
COPYCHAN <nrf> Copy the parameters from the current set-up
channel to channel <nrf>
.
HOLD <cpd> Set hold mode <ON>
, <OFF>, <ENAB> or
<DISAB>. The ON or OFF forms are the
same as pressing the MAN HOLD key. The
ENAB
and DISAB forms are channel
specific and enable or disable the action of
the MAN HOLD key or HOLD input.
FILTER <cpd> Set the output filter to <AUTO>
, <EL10>,
<EL16>, <BESS> or <NONE>.
BEEPMODE <cpd> Set beep mode to <ON>
, <OFF>, <WARN>,
or <ERROR>.
BEEP Sound one beep.
LOCAL Returns the instrument to local operation and
unlocks the k
eyboard.
Will not function if LLO is in force.
Refer to chapter15, Calibr
ation, for remote calibration commands.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...