FLUKE 284-U User Manual for the Fluke 284-U Arbitrary Waveform Generator and Manager, 40 MS/s, 4 Channel

Loading ...

281, 282, 284

Users Manual

16-26

QER? Query and clear query error number

REFCLK <cpd> Set the ref. clock BNC connector to

<IN>, <OUT>, <MASTER> or

<SLAVE>.

SCMLEVEL <nrf> Set the level for SCM to <nrf> Volts.

SETUPCH <nrf> Select channel <nrf>

SEQCNT <nrf1>,<nrf2> Set count for sequence segment <nrf1>

to <nrf2>.

SEQSEG <nrf>,<cpd> Set the status of sequence segment <nrf>

to <ON> or <OFF>.

SEQSTEP <nrf>,<cpd> Set the 'step on' parameter for sequence

segment <nrf> to <COUNT>,

<TRGEDGE> or <TRGLEV>.

SEQWFM <nrf>,<cpd> Set the 'waveform' parameter for sequence

segment <nrf> to <cpd>.

SUM <cpd> Set the sum source to <OFF>, <EXT> or

<PREV>.

SUMATN <cpd> Set the sum input attenuator to <0dB>,

<10dB>, <20dB>, <30dB>, <40dB>

or <50dB>.

SUMRATIO <nrf> Set the sum ratio to <nrf>.

SWPCENTFRQ <nrf> Set the sweep centre frequency to <nrf>

Hz.

SWPDIRN <cpd> Set the sweep direction to <UP>,

<DOWN>, <DNUP> or <UPDN>.

SWPMANUAL <cpd> Set the sweep manual parameters to

<UP>, <DOWN>, <FAST>, <SLOW>,

<WRAPON> or <WRAPOFF>.

SWPMKR <nrf> Set the sweep marker to <nrf> Hz.

SWPSPACING <cpd> Set the sweep spacing to <LIN> or

<LOG>.

SWPSPAN <nrf> Set the sweep frequency span to <nrf>

Hz.

SWPSTARTFRQ <nrf> Set the sweep start frequency to <nrf>

Hz.

SWPSTOPFRQ <nrf> Set the sweep stop frequency to <nrf>

Hz.

SWPSYNC <cpd> Set the sweep sync <ON> or <OFF>.

SWPTIME <nrf> Set the sweep time to <nrf> sec.

SWPTYPE <cpd> Set the sweep type to <CONT>, <TRIG>,

<THLDRST> or <MANUAL>.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 284-U Arbitrary Waveform Generator and Manager, 40 MS/s, 4 Channel

User Manual for the Fluke 284-U Arbitrary Waveform Generator and Manager, 40 MS/s, 4 Channel - Page 137