Loading ...
Loading ...
Loading ...
User Guide 562
Configuring DHCP Service DHCP Server Configuration
Step 3 Bind an IP address to a client:
address
ip-address
client-identifier
client-id
Bind the specified IP address to the client with a specific hexadecimal client ID.
ip-address:
Specify the IP address to be bound.
client-id:
Specify the client ID in hexadecimal format.
address
ip-address
client-identifier
client-id
ascii
Bind the specified IP address to the client with a specific ASCII client ID.
ip-address:
Specify the IP address to be bound.
client-id:
Specify the client ID with ASCII characters.
address
ip-address
hardware-address
hardware-address
hardware-type { ethernet |
ieee802 }
Bind the specified IP address to the client with a specific MAC address.
ip-address:
Specify the IP address to be bound.
hardware-address:
Enter the MAC address of the client.
ethernet | ieee802
:
Specify a hardware type for the client, either Ethernet or IEEE802.
Step 4 show ip dhcp server manual-binding
Verify the manual binding configuration.
Step 5 end
Return to Privileged EXEC Mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to bind the IP address 192.168.1.33 in pool1 (on the
subnet of 192.168.1.0) to the host with the MAC address 74:D4:68:22:3F:34:
Switch#configure
Switch(config)#ip dhcp server pool pool1
Switch(dhcp-config)#address 192.168.1.33 hardware-address 74:d4:68:22:3f:34
hardware-type ethernet
Switch(dhcp-config)#show ip dhcp server manual-binding
Pool Name Client Id/Hardware Address IP Address Hardware Type Bind Mode
------- ------------------- --------- ----------- --------
pool1 74:d4:68:22:3f:34 192.168.1.33 Ethernet MAC Address
Loading ...
Loading ...
Loading ...