Loading ...
Loading ...
Loading ...
User Guide 502
Configuring L2PT (Only for Certain Devices) Configuration Example
1) Choose the menu L2 FEATURES > L2PT to load the following page. Enable the L2PT
feature globally and click Apply.
2) Specify port 1/0/1 as an NNI port and click Apply. Specify port 1/0/2 as a UNI port for
the STP and set the threshold as 1000. Then click Apply. The configuration result is as
follows:
Figure 3-2 Global Config
3) Click to save the settings.
3.4 Using the CLI
The configurations of Switch A and Switch B are similar. The following introductions take
Switch A as an example.
Switch_A#configure
Switch_A(config)#l2protocol-tunnel
Switch_A(config)#interface gigabitEthernet 1/0/1
Switch_A(config-if)#l2protocol-tunnel type nni
Switch_A(config-if)#exit
Switch_A(config)#interface gigabitEthernet 1/0/2
Switch_A(config-if)#l2protocol-tunnel type uni stp 1000
Loading ...
Loading ...
Loading ...