Loading ...
Loading ...
Loading ...
User Guide 994
Configuring OAM (Only for Certain Devices) Ethernet OAM Configurations
Mode Select OAM mode for the port.
Active: The port in this mode can initiate OAM connection. It is the default setting.
Passive: The port in this mode cannot initiate OAM connection or send loopback
control OAMPDUs.
Note:
OAM connection cannot be established between two ports in passive mode.
Make sure that at least one side is in active mode.
Status Enable or disable OAM on the port. By default, it is disabled.
2) Click Apply.
2.1.2 Configuring Link Monitoring
Choose the menu MAINTENANCE > Ethernet OAM > Link Monitoring > Link Monitoring
to load the following page.
Figure 2-2 Configure Link Monitoring
Follow these steps to configure Link Monitoring:
1) In the Link Event section, select a Link Event type to configure.
Loading ...
Loading ...
Loading ...