Loading ...
Loading ...
Loading ...
Configuring Layer 3 Interfaces Layer 3 Interface Configurations
User Guide 515
IPv6 Routing (Optional) Enable IPv6 routing function globally for all Layer 3 interfaces. It is
disabled by default.
2) In the Interface List section, click to load the following page, and configure
the corresponding parameters for the Layer 3 interface. Then click Create.
Interface ID Select an interface type and enter the ID of the interface.
IP Address Mode Specify the IP address assignment mode of the interface.
None: No IP address will be assigned to the interface.
Static: Assign an IP address to the interface manually.
DHCP: Assign an IP address to the interface through the DHCP server.
BOOTP: Assign an IP address to the interface through the BOOTP server.
DHCP Option 12 If you select DHCP as the IP Address Mode, configure the Option 12 here.
DHCP Option 12 is used to specify the client’s name.
IP Address Specify the IP address of the interface if you choose “Static” as the IP address
assignment mode.
Subnet Mask Specify the subnet mask of the interface’s IP address.
Admin Status Enable or disable the interface’s Layer 3 capabilities.
Interface Name (Optional) Enter a name for the interface.
Note:
The created interface is an IPv4 interface. To configure the IPv6 features, please click “Edit IPv6“ after
the interface is created.
Loading ...
Loading ...
Loading ...