Loading ...
Loading ...
Loading ...
Configuring DHCP Service DHCP Server Configuration
User Guide 555
Choose the menu L3 FEATURES > DHCP Service >DHCP Server > Manual Binding and
click to load the following page.
Figure 2-4 Manual Binding
Select a pool name and enter the IP address to be bound. Select a binding mode and finish
the configuration accordingly. Click Create.
Pool Name Select a DHCP server pool from the drop-down list.
IP Address Enter the IP address to be bound to the client.
Binding Mode Select the binding mode:
Client ID: Bind the IP address to the client ID of the client.
Client ID in ASCII: Bind the IP address to the client ID in ASCII format.
Hardware Address: Bind the IP address to the MAC address of the client.
Client ID If you select Client ID as the binding mode, enter the client ID in this field.
Hardware
Address
If you select Hardware Address as the binding mode, enter the MAC address in this
field.
Hardware Type If you select Hardware Address as the binding mode, select a hardware type. The
hardware type includes Ethernet and IEEE802.
2.2 Using the CLI
2.2.1 Enabling DHCP Server
Follow these steps to enable DHCP Server and to configure ping packets and ping timeout.
Step 1 configure
Enter Global Configuration Mode.
Step 2 service dhcp server
Enable DHCP Server.
Loading ...
Loading ...
Loading ...