Loading ...
Loading ...
Loading ...
Configuring DDM (Only for Certain Devices) DDM Configuration
User Guide 137
â– Configuring the Rx Power Threshold
Figure 2-5 Configure Rx Power Threshold
Follow these steps to configure DDM‘s Rx power threshold:
1) In the RX Power table, select one or more SFP ports to configure Rx power threshold
on the SFP ports.
High Alarm Specify the high Rx power threshold for the alarm. When the operating parameter
rises above this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
Low Alarm Specify the low Rx power threshold for the alarm. When the operating parameter
falls below this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
High Warning Specify the high Rx power threshold for the warning. When the operating
parameter rises above this value, action associated with the warning will be taken.
The valid values are from 0 to 6.5535.
Low Warning Specify the low Rx power threshold for the warning. When the operating
parameter falls below this value, action associated with the warning will be taken.
The valid values are from 0 to 6.5535.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...